Arducopter APM 2.5 with 2.9.1b firmware

randy 1203 · Post by **randy 1203** » 23 May 2013, 21:39

Dengan modal nekat akhirnya saya mencoba APM 2.5
hehehe
walau newbie tapi saya tidak takut bingung buat belajar
karna ada guru yg bisa bantu saya yaitu
suhu RJ :cup2

makasih pak atas semua bantuannya
ini APM nya

randy 1203 · Post by **randy 1203** » 23 May 2013, 21:41

setelah di test melalui mission planer :hre

randy 1203 · Post by **randy 1203** » 23 May 2013, 21:46

ini frame nya dan setelah di rakit

randy 1203 · Post by **randy 1203** » 23 May 2013, 21:49

motor rctimer 2830 1000kv
ESC rctimer 30A
prop 10*4.5 cw ccw

mohon bantuan para suhu di gaero ini untuk membantu saya yg newbie
biar hover nya stabil :hre

terutama pak suhu RJ

mandiridjaya · Post by **mandiridjaya** » 23 May 2013, 23:33

duduk di bangku terdepan sambil siap2 bawa laptop (jaman canggih gini klo masih pke kertas ntar kena semprit sama Ahok hee) utk catet2 bakal pak Dosen Rj mengulas mengenai Ardu... mdh2an ga keriting saya dengan bahasanya yg pastinya bakal njelimet ini.. :mtp

randy 1203 · Post by **randy 1203** » 23 May 2013, 23:55

iyah pak suhu mandiridjaya
kita belajar bareng :yes

Post by **rachmatjeny** » 24 May 2013, 00:56

ArduCopter V3 Release - The "expensive multirotor flight system" killer!

Specs of the quad:
- "Kamikaze Quad" frame by Alessandro Parisi (AleBS)
- Mikrokopter MK3638 Motors, 14 poles, 770 rpm/v, 350W
- 12x4.5 Carbon Propellers "APC style"
- HobbyKing F30A 30A ESC reflashed with "SimonK Firmware V.0930"
- ArduCopter APM2.5 Flight Control Board with U-Blox LEA-6H GPS
- 3DR Radio 433 MHz telemetry
- Turnigy 4S 5000 mhA 30C LiPo
- Flight time: 13 minutes

sayang banyak yg bilang susah
:gg

umar rai · Post by **umar rai** » 24 May 2013, 08:55

Success ya Mas, semoga makin maju terus Aero nusantara :doa

Warm regards, :cup2

Umar
PAG - Gresik

orchiplane · Post by **orchiplane** » 24 May 2013, 09:28

tolong di share ya om setingannya step by step biar terlihat mudah buat newbie ky saya..
:doa

mandiridjaya · Post by **mandiridjaya** » 24 May 2013, 09:38

rachmatjeny wrote:ArduCopter V3 Release - The "expensive multirotor flight system" killer!

Specs of the quad:
- "Kamikaze Quad" frame by Alessandro Parisi (AleBS)
- Mikrokopter MK3638 Motors, 14 poles, 770 rpm/v, 350W
- 12x4.5 Carbon Propellers "APC style"
- HobbyKing F30A 30A ESC reflashed with "SimonK Firmware V.0930"
- ArduCopter APM2.5 Flight Control Board with U-Blox LEA-6H GPS
- 3DR Radio 433 MHz telemetry
- Turnigy 4S 5000 mhA 30C LiPo
- Flight time: 13 minutes

sayang banyak yg bilang susah

klo ini namanya di komporin dulu.... :gg

Grage Aeromodelling

Arducopter APM 2.5 with 2.9.1b firmware

Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware

Re: Arducopter APM 2.5 with 2.9.1b firmware