Utk nyang lain kan bisa pakai avr studio saja .
Tapi kalau memang cinta ama avrdude .... ;
AVRdude itu sebenarnya program buat DOS lho pak .
Jadi calling aja lewat sistem DOS di C:\Windows\System32\cmd.exe
terus coba panggil si avrdude pakai prompt command spt di jaman bauhela ....
ER9X : Open Source Firmware for TGY 9x dkk
Moderator: widodo
- Wind Raider
- FOUNDER
- Posts: 2278
- Joined: 16 Jan 2007, 17:04
- Location: Cirebon
- Contact:
- dino
- Major
- Posts: 1791
- Joined: 07 Jun 2008, 18:23
- Location: jatim park
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
Wind Raider wrote:Utk nyang lain kan bisa pakai avr studio saja .
AVRdude itu sebenarnya program buat DOS lho pak .
Jadi calling aja lewat sistem DOS di C:\Windows\System32\cmd.exe
terus panggil si avrdude pakai prompt command spt di jaman bauhela ....
siap dilaksanaken suhu......ttp itu eepe sangat membantu..... bsa setting tx dr computer



uder dos ...pk perintah md/cd/ dll

- dino
- Major
- Posts: 1791
- Joined: 07 Jun 2008, 18:23
- Location: jatim park
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x











hati2 ada TROJAN HORSE di cd....






- Wind Raider
- FOUNDER
- Posts: 2278
- Joined: 16 Jan 2007, 17:04
- Location: Cirebon
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
hah ??? di folder mana ??
Ada print screen nya ndak ??? buat jaga2 ...
Ada print screen nya ndak ??? buat jaga2 ...
- dino
- Major
- Posts: 1791
- Joined: 07 Jun 2008, 18:23
- Location: jatim park
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
Wind Raider wrote:hah ??? di folder mana ??
Ada print screen nya ndak ??? buat jaga2 ...
menyebar di seluruh folder SUHU..... di aplikasi avr programernya jg ad.....



- Wind Raider
- FOUNDER
- Posts: 2278
- Joined: 16 Jan 2007, 17:04
- Location: Cirebon
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
wahhh berarti CD bawaannya ada yg terinfeksi ..
di CD yg saya terima kayak aman2 saja , tidak ada folder/file aneh2 ...
Tapi kita mesti waspada ...

di CD yg saya terima kayak aman2 saja , tidak ada folder/file aneh2 ...
Tapi kita mesti waspada ...

- dino
- Major
- Posts: 1791
- Joined: 07 Jun 2008, 18:23
- Location: jatim park
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x








saran avr ..prog nya donlod di situs atmel saja .... eepe jg di donlod aj di link suhu WR....

- stefendy
- Technical Sergeant
- Posts: 300
- Joined: 14 Aug 2009, 08:13
- Location: Jayapura , 2°34'10.04"S - 140°41'21.37"E
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
Saya sudah berhasil nge-flash tx saya, namun ada beberapa yg saya masih belum tahu yaitu :
1. Spash screen untuk memunculkan nama pilot bagaimana? mohon bimbingannya

2. Ketika selesai splash screen selesai muncul tulisan seperti berikut, padahal throtle idle

3. Semua stick walaupun posisi tengah namun pada display langkahnya tertera 100%, bagaimana mengatasinya ?

Jadi tx-nya belum dicoba terbang.... mohon bimbingannya untuk mengatasinya, terimakasih
1. Spash screen untuk memunculkan nama pilot bagaimana? mohon bimbingannya

2. Ketika selesai splash screen selesai muncul tulisan seperti berikut, padahal throtle idle

3. Semua stick walaupun posisi tengah namun pada display langkahnya tertera 100%, bagaimana mengatasinya ?

Jadi tx-nya belum dicoba terbang.... mohon bimbingannya untuk mengatasinya, terimakasih
- Wind Raider
- FOUNDER
- Posts: 2278
- Joined: 16 Jan 2007, 17:04
- Location: Cirebon
- Contact:
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
Selamat pak Anda sudah sukses
Setelah diflash memang begitu tampilannya .
Selanjutnya tinggal mengkalibrasi sticknya ...
Calibration
Go to CALIB (7/7) in setup menus
Press Down. (->SetMid)
Set Sticks and pots to center.
Press Down. (->SetSpan)
Move sticks and pots through full range.
Press Down. (->Done)
Press Down. (Back to top)
Ini sekalian manualnya pak ...
http://er9x.googlecode.com/svn/trunk/do ... 0Guide.pdf

Setelah diflash memang begitu tampilannya .
Selanjutnya tinggal mengkalibrasi sticknya ...
Calibration
Go to CALIB (7/7) in setup menus
Press Down. (->SetMid)
Set Sticks and pots to center.
Press Down. (->SetSpan)
Move sticks and pots through full range.
Press Down. (->Done)
Press Down. (Back to top)
Ini sekalian manualnya pak ...
http://er9x.googlecode.com/svn/trunk/do ... 0Guide.pdf
- stefendy
- Technical Sergeant
- Posts: 300
- Joined: 14 Aug 2009, 08:13
- Location: Jayapura , 2°34'10.04"S - 140°41'21.37"E
Re: [TX Turnigy 9x ] Update Firmware TGY 9x
Horee... sesuai petunjuk suhu.. akhirnya sudah kelar.. tinggal baca2 manualnya dulu untuk mem-familier-kan diri dengan menu dan setingannya.... coba terbang dengan tx baru dulu ah..... maaf nanya mulu... maklum low level knowledge.... terimakasih bimbingannya ...

